All Nighter Studios
Last Update vor einem Jahr
If you can not hear any sound coming from the speakers, here are a few things to check.
- Check that the fader is raised up on the deck that you have loaded.
- Check the gain/trim on the song.
- Check the master volume is turned up.
- Make sure you see the LEDs on the VU meter running, on the computer screen as well as the controller / Deck
- Check if the speakers are on, someone may have switched it off from the mains.
- Check your output settings.
- Check all wires are connected.
- Please make sure you have selected the correct input channel on the mixer.
- Please make sure the crossfader switch is allocated to the correct channels.
If you are still experiencing issues, please contact support.